Winter Snowflake Tree Silicone Candle Mold

Winter Snowflake Tree Silicone Candle Mold

Create a detailed winter pillar candle with a snow-covered tree design

The Winter Snowflake Tree Silicone Candle Mold creates a decorative candle approximately 8.4 cm high × 5.1 cm wide, or 3.31 inches high × 2.01 inches wide. The finished candle features a raised bare winter tree surrounded by snowflake details on a smooth cylindrical pillar.

Its winter woodland design makes it a strong choice for Christmas candles, seasonal gift baskets, holiday markets, winter décor, and handmade beeswax candle collections. The tree provides a prominent display side, while snowflake details continue around the candle body.

Product Specifications

• Product: Winter Snowflake Tree Silicone Candle Mold
• Mold material: Flexible silicone
• Mold dimensions: Approximately 9.3 cm high × 6.2 cm wide
• Mold dimensions in inches: Approximately 3.66 inches high × 2.44 inches wide
• Finished candle dimensions: Approximately 8.4 cm high × 5.1 cm wide
• Finished candle dimensions in inches: Approximately 3.31 inches high × 2.01 inches wide
• Design: Raised winter tree and snowflake details around a smooth pillar candle
• What’s Included: 1 Winter Snowflake Tree Silicone Candle Mold
• Not Included: Wax, wick, dyes, fragrance, and other candle-making supplies

Use the finished-candle dimensions when planning gift boxes, labels, displays, or seasonal candle arrangements. The exterior mold dimensions are larger than the finished candle.

What Makes This Candle Mold Different?

This mold creates a winter scene that is not limited to Christmas Day. The bare tree and snowflake design can work for holiday displays, winter weddings, seasonal gift sets, and home décor from early winter through the end of the season.

The finished candle’s approximately 2.01-inch width keeps it compact enough for gift baskets and smaller displays while giving the raised tree and snowflake details enough space to stand out.

Making Candles With This Mold

The raised tree branches and snowflakes are the most detailed areas of the mold. A steady pour and careful demolding help preserve those features.

1. Center and secure the wick before pouring.
2. Prepare the wax and candle-making equipment for your project.
3. Pour the wax slowly and steadily.
4. Gently tap the mold after pouring to help release trapped air.
5. Check wick alignment before the wax becomes too firm to adjust.
6. Allow the candle to cool completely and become firm throughout.
7. Use a small topping pour if cooling creates a depression around the wick.
8. Gently peel the silicone away from the finished candle during demolding.

Allow the candle to cool completely before removal. The outside can appear firm while the center remains warm and soft.

Choosing a Wick for the Finished Candle

The finished candle’s approximately 2.01-inch width is a useful starting point for wick selection, but it does not establish one universal wick size.

Wax type, wick construction, fragrance, dye, additives, and desired burn characteristics can all affect the final wick choice. Test-burn your completed wax-and-wick combination before making candles for gifts, sales, or larger batches.

What You’ll Need for Candle Making

This is a candle-forming mold rather than a complete candle-making kit. Before beginning, have the appropriate wax, wick, melting and pouring equipment, and any colors or fragrance materials you plan to use.

Wax, wick, dyes, fragrance, and other candle-making supplies are sold separately.

Cooling and Demolding

Allow the candle to cool completely and become firm throughout before removing it from the mold. When ready, gently flex and peel the silicone away from the candle rather than pulling forcefully on the candle itself.

This helps preserve the raised tree trunk, branch, and snowflake details.

Cleaning and Storing the Silicone Candle Mold

After the mold has cooled, gently flex it to remove residual wax. Inspect the smaller tree branches and snowflake details where wax may remain.

When additional cleaning is needed:

• Hand wash with warm water and a small amount of mild dish soap.
• Use a soft cloth, sponge, or soft-bristled brush.
• Rinse thoroughly.
• Allow the mold to dry completely before storage.

Avoid knives, metal picks, sharp tools, and abrasive pads that could damage the silicone. Store the clean, dry mold in its natural shape in a cool, dry place away from excessive heat, direct sunlight, folding, crushing, or heavy objects.

Is This Candle Mold Right for Your Project?

Choose this mold when you want a winter-themed pillar candle with a more natural woodland look than a traditional Christmas tree or Santa design. It is especially suited to holiday markets, winter displays, seasonal gift sets, and handmade beeswax candle collections.

Beginning candle makers can use this mold, although the smaller raised branch and snowflake details may take some practice to reproduce consistently. Slow pouring, gentle tapping, complete cooling, and careful demolding are especially useful.

Frequently Asked Questions

What size candle does this mold make?

The finished candle measures approximately 8.4 cm high × 5.1 cm wide, or approximately 3.31 inches high × 2.01 inches wide.

What are the mold dimensions?

The exterior mold measures approximately 9.3 cm high × 6.2 cm wide, or approximately 3.66 inches high × 2.44 inches wide.

Does the listing include wax or a wick?

No. This listing is for the candle mold only. Wax, wick, dyes, fragrance, and other candle-making supplies are sold separately.

What wick size should I use?

The finished candle’s approximately 2.01-inch width provides a starting point, but the correct wick should be confirmed through test burns using your exact wax, wick, fragrance, dye, and additives.

Why did some branch or snowflake details not come out clearly?

Trapped air, pouring too quickly, incomplete cooling, or rough demolding can affect smaller raised details. Pour slowly, gently tap the mold after pouring, allow complete cooling, and carefully peel the silicone away during removal.

When should I remove the candle from the mold?

Remove the candle only after it has cooled completely and feels firm throughout. Gently peel the flexible silicone away from the candle instead of forcefully pulling the candle from the mold.

How should I clean and store the mold?

Gently flex away cooled residual wax. When additional cleaning is needed, hand wash with warm water and mild dish soap using soft cleaning tools, then dry completely and store the mold in its natural shape.