Tall Ribbon Twist Silicone Taper Candle Mold

Tall Ribbon Twist Silicone Taper Candle Mold

Create an elegant tall taper candle with a flowing ribbon-twist design

The Tall Ribbon Twist Silicone Taper Candle Mold creates a slender sculptural candle approximately 7.99 inches high × 1.18 inches wide. The finished candle has a smooth central taper wrapped in broad, flowing ribbon-like twists that give it an elevated, modern appearance.

Its tall profile makes it a strong choice for dinner-table décor, wedding displays, gift sets, holiday arrangements, romantic collections, and handmade beeswax candles. The design adds visual movement while maintaining a clean, elegant silhouette.

Product Specifications

• Product: Tall Ribbon Twist Silicone Taper Candle Mold
• Mold material: Flexible silicone
• Mold dimensions: Approximately 8.15 inches high × 2.17 inches wide
• Finished candle dimensions: Approximately 7.99 inches high × 1.18 inches wide
• Design: Tall taper candle with wide ribbon-like spiral twists
• What’s Included: 1 Tall Ribbon Twist Silicone Taper Candle Mold
• Not Included: Wax, wick, dyes, fragrance, and other candle-making supplies

Use the finished-candle dimensions when planning candle holders, packaging, gift boxes, displays, or table arrangements. The exterior mold measurements are larger than the finished candle.

What Makes This Candle Mold Different?

This mold creates a taller and more substantial taper than a standard narrow twisted candle. The finished candle is nearly 8 inches high, while the broad ribbon-like spirals create a pronounced dimensional design around the candle body.

It is especially suited to projects where the candle itself is intended to be part of the décor. The clean, non-seasonal twist design can work for weddings, dinner tables, celebrations, modern home décor, and gift collections throughout the year.

Making Candles With This Mold

The raised ribbon twists are the most detailed areas of the candle. A steady pour and careful release help preserve their smooth definition.

1. Center and secure the wick before pouring.
2. Prepare the wax and candle-making equipment for your project.
3. Pour the wax slowly and steadily.
4. Gently tap the mold after pouring to help release trapped air.
5. Check wick alignment before the wax becomes too firm to adjust.
6. Allow the candle to cool completely and become firm throughout.
7. Use a small topping pour if cooling creates a depression around the wick.
8. Gently peel the silicone away from the candle during demolding.

Because the candle is tall and narrow, keeping the wick centered is especially important for a balanced finished appearance.

Choosing a Wick for the Finished Candle

The finished candle is approximately 1.18 inches wide. That measurement is a useful starting point for wick selection, but it does not establish one universal wick size.

Wax type, wick construction, fragrance, dye, additives, and desired burn characteristics can all affect the final wick choice. Test-burn your completed wax-and-wick combination before producing candles for gifts, sales, or larger batches.

What You’ll Need for Candle Making

This is a candle-forming mold rather than a complete candle-making kit. Before beginning, have the appropriate wax, wick, melting and pouring equipment, and any colors or fragrance materials you plan to use.

Wax, wick, dyes, fragrance, and other candle-making supplies are sold separately.

Cooling and Demolding

Allow the candle to cool completely and become firm throughout before removing it from the mold. The outside may appear set while the center remains warm and soft.

When ready to demold, gently flex and peel the silicone away from the candle rather than pulling forcefully on the candle itself. This helps protect the continuous ribbon-twist pattern.

Cleaning and Storing the Silicone Candle Mold

After the mold has cooled, gently flex it to remove residual wax. Inspect the spiral grooves where small amounts of wax may remain.

When additional cleaning is needed:

• Hand wash with warm water and a small amount of mild dish soap.
• Use a soft cloth, sponge, or soft-bristled brush.
• Rinse thoroughly.
• Allow the mold to dry completely before storage.

Avoid knives, metal picks, sharp tools, and abrasive pads that could damage the silicone. Store the clean, dry mold in its natural shape in a cool, dry place away from excessive heat, direct sunlight, folding, crushing, or heavy objects.

When Should a Silicone Candle Mold Be Replaced?

Replace the mold when its condition begins affecting candle shape, ribbon-twist definition, or reliable release. Inspect it more closely if you notice cuts, punctures, tears, permanent stretching, distortion, or repeated defects in the same place on finished candles.

Cosmetic staining or slight discoloration alone does not necessarily mean the mold needs replacement. Functional condition matters more than age.

Is This Candle Mold Right for Your Project?

Choose this mold when you want a tall, elegant taper candle with a bold sculptural twist. It is especially suited to formal table settings, wedding or event décor, gift sets, romantic displays, and refined handmade candle collections.

Beginning candle makers can use this mold, although the tall, narrow shape makes wick centering, complete cooling, and gentle demolding particularly important.

Frequently Asked Questions

What size candle does this mold make?

The finished candle measures approximately 7.99 inches high × 1.18 inches wide.

What are the mold dimensions?

The exterior mold measures approximately 8.15 inches high × 2.17 inches wide.

Does the listing include wax or a wick?

No. This listing is for the candle mold only. Wax, wick, dyes, fragrance, and other candle-making supplies are sold separately.

What wick size should I use?

The finished candle’s approximately 1.18-inch width provides a starting point, but the correct wick should be confirmed through test burns using your exact wax, wick, fragrance, dye, and additives.

Why is wick centering important for this mold?

The finished candle is tall and narrow, so a centered wick helps maintain the candle’s balanced appearance and supports more consistent test-burn results.

When should I remove the candle from the mold?

Remove the candle only after it has cooled completely and feels firm throughout. Gently peel the flexible silicone away from the candle instead of forcefully pulling the candle from the mold.

How should I clean and store the mold?

Gently flex away cooled residual wax. When additional cleaning is needed, hand wash with warm water and mild dish soap using soft cleaning tools, then dry completely and store the mold in its natural shape.