Product Overview
BeeSmart Ultimate IPM Robbing Screen / Universal Entrance – 8 & 10 Frame
Protect your honey bee colonies from robbing while managing hive entrances throughout the year with the BeeSmart Ultimate IPM Robbing Screen / Universal Entrance. This versatile beekeeping accessory combines five useful functions into one durable, adjustable hive entrance system.
Designed for both 8-frame and 10-frame Langstroth beehives, the BeeSmart Ultimate Robbing Screen helps reduce unwanted access by robbing bees while giving your colony a manageable entrance. Its adjustable doors and support legs allow beekeepers to switch between robbing protection, reduced entrance, full entrance, moving screen, and mouse guard configurations.
Whether you're managing robbing pressure during a nectar dearth, preparing to move a hive, or adjusting entrances for seasonal conditions, this multi-purpose screen offers a convenient solution.
Features & Benefits
-
Five Functions in One: Use as a robbing screen, reduced entrance, full entrance, moving screen, or mouse guard.
-
Helps Reduce Hive Robbing: Adjustable upper entrances help make it more difficult for robbing bees to locate and enter the hive.
-
Fits 8 & 10 Frame Hives: Designed for most conventional Langstroth bottom boards, with removable side tabs for 8-frame equipment.
-
Adjustable Entrance Doors: Two upper swinging doors and one center door latch into position for different hive management needs.
-
Ventilated Design: Built-in ventilation holes and internal baffles help direct hive odors away from the entrance doors.
-
Tool-Free Installation: Attaches using four metal push pins and features slotted mounting holes for vertical adjustment.
-
Durable Construction: Made from UV-treated technopolymer designed for long-lasting outdoor use.
-
Smooth, Rounded Design: No exposed wire mesh or sharp edges.
-
Year-Round Versatility: Adjust the screen as colony strength, weather, and seasonal conditions change.
-
Made in the USA: Manufactured by BeeSmart Designs using recycled materials.
Help Protect Your Beehive from Robbing Bees
Robbing can become a serious concern when nectar sources are limited, particularly during late summer and fall or when colonies are being fed.
The BeeSmart Ultimate IPM Robbing Screen creates a screened barrier over the hive's original entrance. Resident bees can learn to use an upper entrance, while the screen helps make direct access more difficult for robbing bees.
To use the robbing screen configuration, raise and latch both support legs, position the screen flush with the landing board, and open one of the two upper swinging doors.
If robbing bees discover the open entrance, BeeSmart recommends switching to the opposite upper door.
Installation Tip: For routine installation, BeeSmart recommends installing the screen at night or early in the morning while bees are inside the hive. If active robbing is already occurring, install the screen without delay.
Five Hive Entrance Configurations
1. Robbing Screen Mode
Helps protect colonies during periods of robbing pressure. With the support legs raised and the screen lowered against the landing board, open one upper swinging door to provide an alternate entrance for resident bees.
2. Reduced Entrance Mode
Open the center door to create a smaller, recessed hive entrance. This configuration provides a more manageable opening for colonies to defend while still allowing bees to enter and exit.
3. Full Entrance Mode
Lower the support legs and adjust the screen so the legs engage with the landing board. This creates a fully open entrance for increased bee traffic during strong nectar flows.
4. Moving Screen Mode
Prepare a hive for transportation by raising the support legs, lowering the screen flush with the landing board, and closing all three entrance doors.
This configuration prevents bees from entering or exiting through the screen while maintaining entrance ventilation during transport.
5. Mouse Guard Mode
Lower the support legs so they engage with the landing board. This configuration maintains an open entrance for bees while helping prevent most mice from entering the hive.
Designed for 8-Frame & 10-Frame Langstroth Beehives
The BeeSmart Ultimate IPM Robbing Screen / Universal Entrance is compatible with most conventional 8-frame and 10-frame Langstroth bottom boards, including the BeeSmart Ultimate IPM Bottom Board.
For conventional 10-frame equipment, install the screen with the side mounting tabs intact.
For conventional 8-frame bottom boards, score the designated V-grooves on the side tabs using a hive tool or knife, then carefully break off the excess sections before installation.
Important: The breakaway tabs are intended to be removed for 8-frame compatibility. Once removed, they cannot be reattached.
Easy Installation & Adjustable Design
The robbing screen mounts to the hive using four included metal push pins.
-
Remove the push pins from their holders along the top of the screen.
-
Position the screen against the bottom hive box, with its lower edge flush with the landing board.
-
Insert the push pins into the mounting slots at the four corners.
-
Leave enough clearance for the screen to slide freely up and down.
-
Adjust the support legs and entrance doors for your preferred configuration.
The slotted mounting holes allow vertical adjustment without repeatedly removing the screen.
Seasonal Beehive Entrance Management
Spring: Install the robbing screen when beginning spring feeding, if robbing is a concern. Reduced entrance mode can also be useful while colonies are building strength.
Late Spring & Summer: Switch to full entrance mode when colonies are strong and increased bee traffic is needed.
Late Summer & Fall: Use robbing screen or reduced entrance mode after nectar flows end, during feeding, or following honey harvest.
Winter: Once robbing season has passed, switch to mouse guard mode to help discourage mice while maintaining an entrance for the colony.
The BeeSmart Universal Entrance can remain installed year-round and be adjusted as hive management needs change.
Frequently Asked Questions
Will this robbing screen fit an 8-frame beehive?
Yes. The screen is designed for 8-frame and 10-frame Langstroth equipment. For conventional 8-frame bottom boards, the designated side tabs must be removed before installation.
Can I leave the BeeSmart Robbing Screen on my hive all year?
Yes. BeeSmart designed this product for year-round use, with different configurations for robbing protection, colony growth, hive transportation, and mouse protection.
Can this screen be used when moving a beehive?
Yes. Close all three entrance doors in moving screen mode to restrict bee movement through the entrance while maintaining ventilation. Follow appropriate hive transportation and securing practices.
Does this robbing screen require tools to install?
No tools are required for standard installation using the included push pins. A hive tool or knife is needed to remove the breakaway tabs when adapting the screen for conventional 8-frame equipment.
Does it work with regular wooden bottom boards?
Yes. BeeSmart states that the screen works with most conventional 8-frame and 10-frame Langstroth bottom boards, as well as its Ultimate IPM Bottom Board.
Will it completely prevent robbing or keep all mice out?
No hive entrance accessory can guarantee complete protection. This product is designed to help reduce robbing access and prevent most mice from entering when used in the appropriate configurations.
A Versatile Addition to Your Beekeeping Equipment
The BeeSmart Ultimate IPM Robbing Screen / Universal Entrance combines robbing protection, adjustable hive entrances, transportation ventilation, and seasonal mouse protection into one convenient beekeeping accessory.
Order yours from Lappe's Bee Supply and make year-round hive entrance management easier with BeeSmart's versatile design.
